Specifications

AT Command Set Reference
Ver. 1.00
GSM1308AT001 Page 384 Ver. 1.00 – 10/29/2008
4.16.18. $SMSDA Destination Address for SMS
Messages
Command Function This command allows a user to configure
the phone number or email address for the
sending of event data. It is also used in
limiting the originating address for sending
AT commands Over SMS
Command Functional Group Enfora Specific
Command Format Query AT$SMSDA=?
Response $SMSDA: (1 - 5),"1234...","123.."
Write Format Response AT$SMSDA=<index>,<dest
addr>,<gateway number>
Read Format Response AT$SMSDA?
$SMSDA: 1,”<dest addr>”,”<gateway
number>”,
$SMSDA: 2,”<dest addr>”,”<gateway
number>”,
$SMSDA: 3,”<dest addr>”,”<gateway
number>”,
$SMSDA: 4,”<dest addr>”,”<gateway
number>”,
$SMSDA: 5,”<dest addr>”,”<gateway
number>”,
OK
Execution Format Response N/A
Parameter Values
<index> 1 – 5 defines the index number for
destination address
<dest addr> 38 characters or less phone number or
email address
<gateway> 7 characters or less gateway number for
email address
Reference N/A