Specifications

AT Command Set Reference
Ver. 1.00
GSM1308AT001 Page 29 Ver. 1.00 – 10/29/2008
2.1.2.11. AT+CSNS Single Numbering Scheme
Command Function This command selects the bearer or
teleservice to be used when mobile
terminated single numbering scheme call is
established. Parameter values set with
+CBST command shall be used when
<mode> equals to a data service. If
+CBST parameter is set to a value that is
not applicable to single numbering calls,
ME/TA shall map the value to the closest
valid one. E.g. if user has set <speed>=71,
<name>=0 and <ce>=1 (non-transparent
asynchronous 9600 bps V.110 ISDN
connection) for mobile originated calls,
ME/TA shall map the values into non-
transparent asynchronous 9600 bps V.32
modem connection when single numbering
scheme call is answered.
Command Functional Call Control
Group
Command Format Query AT+CSNS=?
Response +CSNS: (0-7)
OK
Write Format AT+CSNS = <mode>
Response OK
Read Format AT+CSNS?
Response +CSNS: 0
OK
Execution Format N/A
Response N/A