Specifications

AT Command Set Reference
Ver. 1.00
GSM1308AT001 Page 373 Ver. 1.00 – 10/29/2008
4.16.9. %CGPCO Set Type of Authentication, Username
and Password (continued)
Parameter Values
<Input format> 0 - Inputs specified in Hexadecimal
1 - Inputs specified in ASCII
<Authentication data> Authentication data (ASCII)
<username>,<password> where
Username: Maximum 64 bytes ASCII string.
Password: Maximum 64 bytes ASCII string.
Authentication data (Hexadecimal):
Protocol Configuration Option specified
in Hex value; maximum size is equal to 251
bytes.
<cid> 0 – The new username and password is to
be applied to all context Activation.
1 – The new username and password is to
be applied to Context identifier 1.
2 – The new username and password is to
be applied to Context identifier 2.
Reference N/A
Standard Scope N/A
Enfora Implementation Scope Full
Notes
If %CGPCO is set with the input format of 0
(hexadecimal), then the setting of
AT%CGPPP will be ignored.
Username and Password are case
sensitive.