Specifications

AT Command Set Reference
Ver. 1.00
GSM1308AT001 Page 370 Ver. 1.00 – 10/29/2008
4.16.7. %CGAATT Automatic Attach and Detach
Mode
Command Function This command is used to chose the
behavior of the attach procedure.
Command Functional GPRS Commands
Group
Command Format Query AT%CGAATT=?
Response %CGAATT: (0,1),(0,1)
OK
Write Format AT%CGAATT=<att_m>,<det_m>
Response OK
Read Format AT%CGAATT?
Response %CGAATT: 1,1
OK
Execution Format
Response
<att_m> automatic attach mode
0 automatic attach
1 manual attach
<det_m> automatic detach mode
0 automatic detach after last context
deactivation
1 manual detach
Reference
Standard Scope
Enfora Implementation Scope
Notes When automatic attach/detach is enabled
and at$areg=1 or 2, the modem will
automatically attach onto and detach from
the GPRS network upon power on or power
down.