Specifications

AT Command Set Reference
Ver. 1.00
GSM1308AT001 Page 366 Ver. 1.00 – 10/29/2008
4.16.4. %CPI Call Progress Information
(continued)
Parameter Values
<mode> (parameter sets/shows the result code
presentation status in the TA)
0 disable
1 enable
2 status
3 append cause and ALS bearer state
to unsolicited result code
<cId> integer type; call identification number as
described in GSM 02.30 subclause 4.5.5.1
<msgType> (layer 3 message type)
0 setup message
1 disconnect message
2 alert message
3 call proceed message
4 synchronization message
5 progress description message
6 connect
7 reset request for call reestablishment
8 reset confirm for call reestablishment
9 call release
10 call reject
11 mobile originated call setup
12 call hold
<ibt> (status of the usage of in-band tones)
0 no in-band tones
1 in-band tones
<tch> (TCH assignment)
0 TCH not assigned
1 TCH assigned
Reference N/A
Standard Scope N/A
Enfora Implementation Scope N/A