Specifications

AT Command Set Reference
Ver. 1.00
GSM1308AT001 Page 332 Ver. 1.00 – 10/29/2008
4.12.3. $DISC Disconnect Network Connection
Command Function This command allows the user to initiate a
network disconnect. This command is only
valid for AT$HOSTIF=3 after the local PPP
connection has been established or over-
the-air as an API command when in TCP
PAD mode.
Command Functional Enfora Specific
Group
Command Format Query N/A
Response N/A
Write Format N/A
Response N/A
Read Format N/A
Response N/A
Execution Format AT$DISC
Response OK
Parameter Values N/A
Reference N/A
Standard Scope Optional
Enfora Implementation Scope Full
Notes This command will only disconnect the
network connection when AT$HOSTIF=3.
The local PPP connection will remain
active.
This command can also be used to function
as a disconnect request for TCP PAD. It
must be sent over the air using the UDPAPI
AT Command write sequence