Specifications

AT Command Set Reference
Ver. 1.00
GSM1308AT001 Page 320 Ver. 1.00 – 10/29/2008
4.10.5. $RTCRSET RTC Report Reset State
Command Function This command reports the reset state of the
RTC following a power cycle. The
command reports TRUE only if a reset
occurred since last power up and last call to
check it. So multiple calls will report the
current status only.
Command Functional Enfora Specific
Group
Command Format Query N/A
Response N/A
Write Format N/A
Response N/A
Read Format N/A
Response N/A
Execution Format AT$RTCRSET
Response $RTCRSET : <reset state>
OK
Parameter Values
<reset state> 1 indicates that a RTC reset occurred,
0 indicates that a RTC reset did NOT occur
Reference N/A
Standard Scope Optional
Enfora Implementation Scope Full
Notes This command returns the current reset
state of the RTC since power-up. If multiple
calls are made only current reset state is
returned.