Specifications

AT Command Set Reference
Ver. 1.00
GSM1308AT001 Page 23 Ver. 1.00 – 10/29/2008
2.1.2.8. AT+CR Service Reporting Control
Command Function This command is used to control the display
of intermediate result code (+CR <serv>)
status.
Command Functional Response Control
Group
Command Format Query AT+CR=?
Response +CR: (0,1)
OK
Write Format AT+CR=<mode>
Response OK
Read Format AT+CR?
Response +CR: 0
OK
Execution Format N/A
Response N/A
Parameter Values
<mode> 0 disable
1 enable
<serv> ASYNC asynchronous transparent
SYNC synchronous transparent
REL ASYNC asynchronous non-
transparent
REL SYNC synchronous non-
transparent
Reference GSM Ref. 07.07 Chapter 6.9
Standard Scope Mandatory
Enfora Implementation Scope Full