Specifications

AT Command Set Reference
Ver. 1.00
GSM1308AT001 Page 316 Ver. 1.00 – 10/29/2008
4.10.2. $RTCTIME Real Time Clock Time
(continued)
Parameter Values Parameters are positional dependent, any
parameter may be omitted with the use of
the comma (‘,’) as a place holder on
command line. If a parameter is omitted
then the current value in the hardware is
used.
< rtc_wkday > Current week day matching time day being
set.
The week day values range from 0..6,
where;
0->Sunday, 1->Monday, 2->Tuesday,
3->Wednesday, 4->Thursday, 5->Friday,
and 6->Saturday.
< rtc_year > The year on which the time is being set to.
The RTC supports years 2000-2099. The
data is entered as a two digit value 0..99.
<rtc_month> The month on which the time is being set
to. Values range from 1..12.
<rtc_day> The day on which the time is being set to.
Values range from 1..31.
<rtc_hour> The hour on which the time is being set to.
Values range from 0..24 for 24-Hour mode
settings.
NOTE: only 24-Hour mode currently
supported.
<rtc_min> The minute on which the time is being set
to. Values range from 0..59.
<rtc_sec> The second on which the time is being set
to. Values range from 0..59.
Reference N/A
Standard Scope Optional
Enfora Implementation Scope Full