Specifications

AT Command Set Reference
Ver. 1.00
GSM1308AT001 Page 308 Ver. 1.00 – 10/29/2008
4.9.6. $STOATEV Store AT Command Events
(continued)
Notes This command is used in conjunction with
the Dynamic Input Output event
(AT$EVENT). The output event associated
with this command is event 44. When
output event 44 is defined in the event
table, Parm1 defines which index to refer
to. The AT command associated with the
index is executed.
When storing command to dial a voice
call, a “v” replaces the “;” at the end of
the dial string..ie atd17195551212v
Example:
Initiate a voice call from abbreviated dialing phone book store location 1.
AT$STOATEV=1,ATD>AD1v
Dial number in phonebook location 1
AT Command event index
Use a GPIO input event to trigger a stored AT command event:
AT$EVENT=1,0,0,1,1
Ending range of 1 (high)
Starting range of 1 (high)
Activity on I/O line #1 based on range
Input transition event
Event group 1
AT$EVENT=1,3,44,1,0
Ignored
Stored Event index
Execute stored AT event
Output event
Event group 1