Specifications

AT Command Set Reference
Ver. 1.00
GSM1308AT001 Page 301 Ver. 1.00 – 10/29/2008
Message Format Table 3 (1,1)
Parm2 Description
Bit 0 1 = send all data generated as a result of this table in Binary format
0 = send all data generated as a result of this table in ASCII format
Bit 1 1 = Add parm1 data to message (4 bytes in binary format, 11 bytes of
data in ASCII format)
0 = do not add parm1 data to outbound message
Bit 2 1 = add $MDMID value (22 bytes of ASCII data irrespective of Bit 0
setting)
0 = do not add $MDMID value
Bit 7 1 = add input <event category> number (1 byte in binary format, 3
bytes in ASCII format)
0 = do not add input <event category> number
Bit 21 1 = add RTC time (6 bytes of RTC time in binary format or 13 bytes
in ASCII format)
0 = do not add RTC time
Bit 22 1 = Replace/append modem ID field with 10-byte modem ID
(including one leading and one ending space character) in ASCII
format. Replace/append modem ID with 8 bytes long modem ID
value in binary format (no leading or ending space characters in
binary format).
(NOTE: Bit 22 setting overrides Bit 2 setting)
0 = send the modem ID as defined by Bit 2
Notes A maximum of 400 events (input and
output) are supported.
Reference
Standard Scope Optional
Enfora Implementation Scope Full