Specifications

AT Command Set Reference
Ver. 1.00
GSM1308AT001 Page 291 Ver. 1.00 – 10/29/2008
120 Flash GPIO #20 configured as Output
125 0 – 9 -2147483648
to
2147483647
Sets user variable indicated by
parm1 to value of parm2 (for
example, if parm1 is 7 and parm2
is 50, this output event would set
user variable 7 to 50)
126 0 – 9 -2147483648
to
2147483647
Increments user variable indicated
by parm1 by value of parm2 (for
example, if parm1 is 4, parm2 is
100, and user variable 4 was 200
prior to this event, user variable 4
would be incremented to 300 by
this event)
127 0 – 9 -2147483648
to
2147483647
Decrements user variable
indicated by parm1 by value of
parm2 (for example, if parm1 is
9, parm2 is 10, and user variable
9 was 50 prior to this event, user
variable 9 would be decremented
to 40 by this event)
128 0 – 9 -2147483648
to
2147483647
Copies value of a system variable
into user variable indicated by
parm1. Parm2 is used as an index
to determine the system variable
that will be copied (see User
Variable Index Table).