Specifications

AT Command Set Reference

Ver. 1.00

GSM1308AT001 Page 285 Ver. 1.00 – 10/29/2008

with <Parm2> is set to 1.

Input Trigger

An Input Trigger is defined as an input condition,

defined by <event category>, that should be

used as a logical AND condition to another input

condition defined as Transition Trigger or an

Occurrence Trigger. An Output event is not triggered

when Input Trigger condition is valid.

The input event, defined as Input Trigger, is valid

when within the event range defined by <parm1>

and <parm2> or when <parm1> and <parm2>

are equal.

Output

An Output event is executed when all input event

conditions (defined as Transition Trigger,

Occurrence Trigger, or Input Trigger) for that

particular <event group> are met.

<event category>,<parm1>,<parm2> These parameters defines the actual Input or Output

Event number and their valid range for <parm1>

and <parm2>.

The below table defines the values for <event

category>, <parm1> and <parm2> parameter for

input events defined as a Transition Trigger,

Occurrence Trigger, or Input Trigger.

event