Specifications

AT Command Set Reference
Ver. 1.00
GSM1308AT001 Page 279 Ver. 1.00 – 10/29/2008
4.8.14. $PADESC PAD Escape Character
Command Function This command allows the user to query /
set the PAD escape character. If PAD
escape is enabled via AT$PADCMD,
receipt of this character will cause the
following character to be treated as data. It
is typically used to allow the forward,
backspace or escape character to be
processed as data rather then as a special
character.
Command Functional Enfora Specific
Group
Command Format Query AT$PADESC=?
Response $PADESC:(0-ff)
OK
Write Format AT$PADESC=<escape character>
Response OK
Read Format AT$PADESC?
Response $PADESC: <escape character>
Execution Format N/A
Response N/A
Parameter Values
<escape character> Hex representation of user selected escape
character. Default escape character is 00
Reference
Standard Scope Optional
Enfora Implementation Scope Full
Notes N/A