Specifications

AT Command Set Reference
Ver. 1.00
GSM1308AT001 Page 272 Ver. 1.00 – 10/29/2008
4.8.10. $IDLETO TCP PAD Idle Timeout
Command Function This command sets the length of time, in
seconds, a TCP session connection will
remain active without the remote
connection sending any data.
Command Functional Enfora Specific
Group
Command Format Query AT$IDLETO=?
Response $IDLETO: (10-86400)
OK
Write Format AT$IDLETO =<timeout>
Response OK
Read Format AT$IDLETO?
Response $IDLETO: <timeout>
Execution Format N/A
Response N/A
Parameter Values
<timeout> 10-86400 = timeout value in seconds
Reference N/A
Standard Scope Optional
Enfora Implementation Scope Full
Notes If no communication is received from the
remote connection in the specified time, the
modem will gracefully attempt to close the
connection.
T-Mobile and AT&T networks will shut down
a TCP connection if the connection is idle.