Specifications

AT Command Set Reference
Ver. 1.00
GSM1308AT001 Page 270 Ver. 1.00 – 10/29/2008
4.8.8. $PADCMD PAD Command Features
Command Function This command allows the user to set/query
PAD configuration options.
Command Functional Enfora Specific
Group
Command Format Query AT$PADCMD=?
Response $PADCMD: (00-FFFF)
OK
Write Format AT$PADCMD =<pad feature select >
Response OK
Read Format AT$PADCMD?
Response $PADCMD: "<pad feature select >”
Execution Format N/A
Response N/A
Parameter Values
<pad feature select > AND selected HEX options into a single
16 bit word.
0001=Enable forwarding on special char
0002=Forward special char with data
0008=Enable backspace
0400=Enable escape character to treat next
character as data
Reference N/A
Standard Scope Optional
Enfora Implementation Scope Full
Notes A +++ is an escape sequence to exit PAD
mode. Disabling of the escape sequence is
not supported, however the escape is only
applicable when there is a 1 second guard
time before and after the +++. If the guard
period is not met before and after the
escape sequence, it will be forwarded as
data.