Specifications

AT Command Set Reference
Ver. 1.00
GSM1308AT001 Page 269 Ver. 1.00 – 10/29/2008
4.8.7. $PADTO PAD Timeout Value
Command Function This command allows the user to query/set
the PAD timeout value. Data will be
forwarded to the PAD destination even if
the PAD block size has not been reached if
<pad timeout> period has elapsed since the
last PAD character was received from the
local host.
Command Functional Enfora Specific
Group
Command Format Query AT$PADTO
Response $PADTO: (0-65535)
OK
Write Format AT$PADTO = <PAD timeout>
Response OK
Read Format AT$PADTO
Response $PADTO: <PAD timeout>
Execution Format N/A
Response N/A
Parameter Values
<PAD timeout> The number of tenths of seconds to wait for
the receipt of more PAD data before
forwarding the currently accumulated PAD
buffer to the PAD destination. A value of
zero disables the PAD timeout feature. If
the PAD timeout feature is disabled, no
data will be forwarded to the destination
until either an enabled forward character is
received, or the selected PAD buffer size is
reached. (50 = 5 seconds)
Reference N/A
Standard Scope Optional
Enfora Implementation Scope Full
Notes N/A