Specifications

AT Command Set Reference
Ver. 1.00
GSM1308AT001 Page 267 Ver. 1.00 – 10/29/2008
4.8.5. $PADBS PAD Backspace Character
Command Function This command allows the user to query/set
the PAD backspace character. If PAD edit
is enabled via AT$PADCMD, this character
will cause the previous character to be
deleted from the PAD output buffer. If the
previous character has already been
forwarded due to a PAD timeout or receipt
of an enabled forward character, receipt of
the PAD edit character will have no affect.
Command Functional Enfora Specific
Group
Command Format Query AT$PADBS =?
Response $PADBS: (0-ff)
OK
Write Format AT$PADBS =<backspace character>
Response OK
Read Format AT$PADBS?
Response $PADBS: <backspace character>
Execution Format N/A
Response N/A
Parameter Values
<backspace character > Hex representation of user selected
backspace character. Normal backspace
character is 08.
Reference N/A
Standard Scope Optional
Enfora Implementation Scope Full
Notes N/A