Specifications

AT Command Set Reference
Ver. 1.00
GSM1308AT001 Page 265 Ver. 1.00 – 10/29/2008
4.8.3. $ACTIVE TCP PAD State
(continued)
Standard Scope Optional
Enfora Implementation Scope Full
Notes If passive is chosen, the PAD will be in
server mode and listen for inbound TCP
connection requests. If active is chosen,
the PAD will be in client mode and will
initiate a connection based on the ATDT
command, or if atd*99# is used to initiate a
GPRS connection, the values populated in
AT$PADDST. A value of 0 indicates
passive, server mode of operation. A value
of 1 indicates active, client mode of
operation. ATDT will be used to initiate the
passive, server mode functionality. If
ATDTxxx.xxx.xxx.xxx/xxxx is used, it will
override the passive mode and replace the
AT$PADDST parameters as it does in UDP
PAD mode.