Specifications

AT Command Set Reference
Ver. 1.00
GSM1308AT001 Page 263 Ver. 1.00 – 10/29/2008
4.8.2. $PADSRC PAD Source Port
Command Function This command allows the user to query/set
the API PAD source port. Remote data
received from a valid destination address to
this source port will be processed as
incoming PAD data. This port is also used
as the source port for all data sent to the
PAD destination. This value must be
different than the UDPAPI port.
Command Functional Enfora Specific
Group
Command Format Query AT$PADSRC=?
Response $PADSRC: (0-65535)
OK
Write Format AT$PADSRC = <PAD source port>
Response OK
Read Format AT$PADSRC?
Response $PADSRC: <PAD source port>
Execution Format N/A
Response N/A
Parameter Values
<PAD source port > PAD source port is used as the source port
in all outgoing PAD data messages. The
remote host must use this port number as
the destination port for PAD data sent to the
device.
Reference N/A
Standard Scope Optional
Enfora Implementation Scope Full
Notes N/A