Specifications

AT Command Set Reference
Ver. 1.00
GSM1308AT001 Page 262 Ver. 1.00 – 10/29/2008
4.8.1 $PADDST PAD Destination IP/Port
(continued)
<PAD destination port > Destination port for PAD data. PAD data is
sent to and received from this port. A
destination port of 0 will allow PAD access
from any port, and will cause all locally
generated PAD data to be sent to the port
associated with the last remotely received
PAD data.
Reference N/A
Standard Scope Optional
Enfora Implementation Scope Full
Notes A value of 0 will allow any IP/port access to
the TCP PAD. If populated and in passive,
server mode (AT$ACTIVE=0) the TCP PAD
will limit access to the IP/port defined.
You will use either the PAD Destination IP
Address, or the PAD Destination DNS
Name, but not both.