Specifications

AT Command Set Reference
Ver. 1.00
GSM1308AT001 Page 16 Ver. 1.00 – 10/29/2008
2.1.2.3. ATD> Originate Call Using Phonebook Memory
Command Function This command is used to setup an
outbound voice or data call from a specific
phonebook location.
Command Functional Call Control
Group
Command Format Query ATD?
Response ATD<storage><n><cmod><;>
Write Format N/A
Response N/A
Read Format N/A
Response N/A
Execution Format ATD>SD12I;
Response NO DIALTONE or
NO CARRIER or
CONNECT <value> or
BUSY or
OK
Parameter Values
<storage> Phonebook Location
<n> Storage location number in selected
phonebook
<cmod> GSM Modifier Characters
I = Restrict CLI, i = Allow CLI
<;> Semicolon after dialing string or modifier
forces TA into command mode after
successful completion.
Reference GSM Ref. 07.07 Chapter 6.3
Standard Scope Mandatory
Enfora Implementation Scope Full