Specifications

AT Command Set Reference
Ver. 1.00
GSM1308AT001 Page 15 Ver. 1.00 – 10/29/2008
2.1.2.2. ATD Dial command
(continued)
Reference GSM Ref. 07.07 Chapter 6.2
Standard Scope Mandatory
Enfora Implementation Scope Full
Notes
Modem Responses
NO DIALTONE if no dial tone is detected
NO CARRIER if call cannot be set up
CONNECT <value> when connected in a non-voice call (data
mode) <value> dependent on ATX setting
BUSY if dialed number is busy
OK when successful voice call or TA ends
current call and returns to command mode
Example:
ATD5551212I
The TA will dial the number 5551212 and will block the CLI when made.