Specifications

AT Command Set Reference
Ver. 1.00
GSM1308AT001 Page 217 Ver. 1.00 – 10/29/2008
4.3.5. $VSELECT Voice Select
Command Function This command selects the voice mode of
the device. Only valid options applicable to
the hardware will be allowed. All applicable
constants and settings are loaded when the
mode is changed and at power up.
Command Functional Enfora Specific
Group
Command Format Query AT$VSELECT=?
Response $VSELECT: (0,1,3)
OK
Write Format AT$VSELECT= <mode>
Response OK
Read Format AT$VSELECT?
Response $VSELECT: 0
Execution Format AT$VSELECT
Response $VSELECT : <reset state>
OK
Parameter Values
<Mode> 0 Selects handset for voice
1 Selects headset for voice
3 Automatic mode
Reference N/A
Standard Scope Optional
Enfora Implementation Scope Full