Specifications

AT Command Set Reference
Ver. 1.00
GSM1308AT001 Page 193 Ver. 1.00 – 10/29/2008
3.1.18 +CIND Indicator Control
Command Function Set command is used to set the values of
MT indicators.
Read command returns the status of MT
indicators. If MT is not currently reachable,
+CME ERROR: <err> is returned. Refer
subclause 9.2 for <err> values.
Test command returns pairs, where string
value <descr> is a maximum 16 character
description of the indicator and compound
value is the allowed values for the indicator.
If MT is not currently reachable, +CME
ERROR: <err> is returned. Refer
subclause 9.2 for <err> values.
Command Functional Group
Command Format Query AT+CIND=?
Response +CIND: (“signal”,(0-5)),(“smsfull”,(0-1))
OK
Write Format AT+CIND=<signal>,<smsfull>
Response OK
Read Format AT+CIND?
Response +CIND: <signal>,<smsfull>
OK
Execution Format N/A
Response N/A
Parameter Values .
<signal> signal quality (0-5)
<smsfull> A short message memory storage in the MT
has become full and a short message has
been rejected (2), has become full(1), or
memory locations are available (0).