Specifications

AT Command Set Reference
Ver. 1.00
GSM1308AT001 Page 10 Ver. 1.00 – 10/29/2008
2.1.1.5. AT+CSCS Select TE Character Set
Command Function This command is used to select the
terminal equipment character set.
Command Functional State Control
Group
Command Format Query AT+CSCS=?
Response +CSCS: <"GSM", "IRA" , "PCCP437" ,
"PCDN" , "8859-1" , "HEX" , “UCS2”>
OK
Write Format AT+CSCS=<chset>
Response OK
Read Format AT+CSCS?
Response +CSCS: “PCCP437”
OK
Execution Format N/A
Response N/A
Parameter Values
<chset> "GSM"
"IRA"
"PCCP437"
"PCDN"
"8859-1"
"HEX"
"UCS2"
Reference GSM Ref. 07.07 Chapter 5.5
Standard Scope Mandatory
Enfora Implementation Scope Partial
Notes Values are based on character set support.