Specifications

AT Command Set Reference
Ver. 1.00
GSM1308AT001 Page 171 Ver. 1.00 – 10/29/2008
3.1.1. +CGDCONT Define PDP Context
(continued)
Parameter Values
<cid> PDP Context Identifier
<PDP_type> “IP”
<”APN”> “Access Point Name”
<”PDP_addr”> ” Identifies the MT in the address space”
<d_comp> 0 off
1 on
<h_comp> 0 off
1 on
Reference GSM Ref. 07.07 Chapter 10.1.1
Standard Scope Mandatory
Enfora Implementation Scope Full
Notes AT+CGDCONT must be entered before
Context activation.
AT+CGDCONT=1,”IP”,””,””,0,0 may be
entered for networks that dynamically
assign the APN. Contact your service
provider for correct APN information.