Specifications

AT Command Set Reference
Ver. 1.00
GSM1308AT001 Page 167 Ver. 1.00 – 10/29/2008
2.3.2.9. S7 Wait for Completion
Command Function This command sets the number of seconds
to wait after dial tone detection before
dialing a number. This is a dummy
command that will display a value that has
been set, but does not affect functionality.
Command Functional Call Control
Group
Command Format Query ATS7=?
Response S7(1-255)
OK
Write Format ATS7=<value>
Response OK
Read Format ATS7?
Response 060
OK
Execution Format N/A
Response N/A
Parameter Values N/A
Reference ITU-T Ref. V.25ter Chapter 6.3.10
Standard Scope Mandatory
Enfora Implementation Scope Full
Notes Does not affect GSM functionality.