Specifications

AT Command Set Reference
Ver. 1.00
GSM1308AT001 Page 162 Ver. 1.00 – 10/29/2008
2.3.2.4. H Hook Control
Command Function Disconnect an existing call.
Command Functional Call Control
Group
Command Format Query N/A
Response N/A
Write Format N/A
Response N/A
Read Format N/A
Response N/A
Execution Format ATH
Response OK
Parameter Values N/A
Reference ITU-T Ref. V.25ter Chapter 6.3.6
Standard Scope Mandatory
Enfora Implementation Scope Full
Notes If data call or session is active, +++ (escape
sequence) must be entered to go to
command mode prior to sending ATH
command.