Specifications

AT Command Set Reference
Ver. 1.00
GSM1308AT001 Page 157 Ver. 1.00 – 10/29/2008
2.3.1.23. AT$IFC Default Value for AT+IFC
Command Function This command allows the user to choose a
different default value for AT+IFC. AT+IFC
will be set to default value after issuing
AT&F command.
Command Functional Enfora Specific
Group
Command Format Query AT$IFC=?
Response $IFC: (0-1)
Write Format AT$IFC= DIFCvalue
Response OK
Read Format AT$IFC?
Response $IFC: DIFCvalue
Execution Format N/A
Response N/A
Parameter Values
<CSD RI Mode> 0 Next AT&F will set AT+IFC to 2,2
1 Next AT&F will set AT+IFC to 0,0
Reference N/A
Standard Scope Optional
Enfora Implementation Scope Full
Notes: DIFCvalue itself would not be affected by
AT&F command.