Specifications

AT Command Set Reference
Ver. 1.00
GSM1308AT001 Page 135 Ver. 1.00 – 10/29/2008
2.3.1.2. AT&F Set All TA Parameters to Factory
Defined Configuration
Command Function Set All TA Parameters to Factory Defined
Configuration
Command Functional State Control
Group
Command Format Query N/A
Response N/A
Write Format N/A
Response N/A
Read Format N/A
Response N/A
Execution Format AT&F
Response OK
Parameter Values N/A
Reference GSM Ref. 07.07 Chapter 6.1.2
Standard Scope Mandatory
Enfora Implementation Scope Full
Notes The OK response is returned PRIOR to this
command being executed on the module to
allow the response to be seen at the current
baud rate in case the factory default
changes this (back to autobaud). Allow 1
Second after the returned OK before
issuing the next command.