User guide

Enfora GSM1308 and
GSM1318
Quad-Band Spider®
SA-G+
User Guide P a g e 21 Revision: 1.03
5. Configure the SA-G+ to communicate with the Enfora Test Server.
y. The following information will need to be obtained from the SIM provider.
Please refer to GSM0000AN019 – Network Configuration Worksheet.
z. APN
aa. Username and password (If necessary.)
Note: : In the following examples, the SIM is for Cingular.
APN = isp.cingular
Username = [e-mail]
Password = CINGULAR1
bb. Reset the SA-G+ to factory defaults:
To restore the SA-G+ to factory defaults, send the following command:
AT&F<CR>
To write current config to memory, send the following command:
AT&W<CR>
To reset the SA-G+, send the following command:
AT$RESET<CR>