User guide

SA-EL User Manual
Ver. 1.00
EDG1228UG001 6 Version 1.00 – 3/30/2006
2.2 Connecting the Power Supply
The SA-EL modem obtains power via the USB cable that connects the modem to
your computer.
To supply power to the SA-EL modem, connect the B connector of your USB
cable to the connector (labeled "USB") on the modem. Connect the A connector
of the USB cable to an USB port on your computer. The user supplies the USB
cable.
Note: Make sure the SIM card is inserted prior to connecting the
USB cable to the SA-EL and your computer.
Also, please make sure that the USB drivers are installed before
connecting the SA-EL to your computer. Please see page nine
(9) for instruction.
Figure 4 - Connecting The Power Supply To SA-EL