Specifications

ExposurePropertyObject
Not exposedCP2:session_id
CP2:start_byte
Session
CP2:user_id_ref
Read-onlyCP2:start_time
CP2:end_time
Session
Read-onlyCP2:tool_id
CP2:tool_version
Session
CP2:tool_desc
CP2:appl_id
CP2:appl_version
CP2:appl_desc
Not exposedCP2:user_idUser
Not exposedCP2:session_id_refCertificate
Read-onlyCP2:timeCertificate
For sessions and users all required properties are automatic. For certificates
however the required properties listed in the following table must be supplied
by the script programmer; most even don’t have a default value.
Default valuePropertyObject
Other required
properties
None
Value to be supplied by
script
CP2:type_id
CP2:type_version
CP2:type_desc
Certificate
CP2:impl_id
CP2:impl_version
CP2:statement_desc
“Unknown
Value can be overridden
by script
CP2:stateCertificate
“All”
Value can be overridden
by script
CP2:zonesCertificate
Editing zones
A new certificate is automatically sensitive to all editing zones. If this is
not changed, any zone touched in any following session makes the
Zones for which a
certificate is
sensitive
certificate dirty. It is advisable to narrow the certificate’s editing zones
down to avoid it becoming dirty unnecessarily.
The active session starts without any editing zones set. For each
modification applied to the PDF file during that session, appropriate editing
Zones touched
during a session
499
Enfocus Switch 10