Specifications
DescriptionProperty
This connection receives a job as long as its target folder’s size does
not exceedthis limit after adding the job; a zero value means this
constraint is disabled
Maximum folder size (MB)
The absolute path of the folder that should be checked for job count
and/or size; Default means the connection’s target folder
Note: Whenever a job arrives in the Hold job tool, Switch checks the
Target folder. Jobs that are in between the Hold job tool and the
Target folder
Target folder are not taken into account for the constraint. To make
sure that there are no jobs in between the Hold job tool and the
Target folder, space the jobs apart for a certain period of time.
If set to yes, this connection is eligible to receive jobs only during a
certain time of the day (specified in the corresponding properties)
Time-of-day window
The time-of-day window during which to receive jobs; the values
are structured as "hh:mm" (hours, minutes) indicating a time of day
Allow from (hh:mm)
Allow to (hh:mm)
on a 24 hour clock; an empty value means midnight; two identical
values mean the connection is always eligible
If set to yes, this connection is eligible to receive jobs only during
certain days of the week (specified in the subordinate properties)
Day-of-week window
The days of the week (Monday, Tuesday, Wednesday, Thursday,
Friday, Saturday, Sunday) during which to receive jobs; two identical
values mean the connection is eligible for that 1 single day
Allow from
Allow to
If set to yes, this connection is eligible to receive jobs only during a
certain day of the month (specified in the subordinate properties)
Day-of-month window
The day in the month during which to receive jobs, as a number in
the range [1 .. 31]; the default value of one means the first or the
last day of the month (depending on the following property)
Day
Determines whether the day of the month is relative to “Start of
month’” or “End of the month”
Relative to
If set to yes, jobs moving over this connection are spaced apart by
a minimum period of time (specified in the subordinate properties);
Space jobs apart
example: after the connection receives a job it becomes eligible to
receive another job only after the specified period of time has passed
Selects the unit for the subsequent property: Seconds, Minutes, Hours,
Days
Unit
The spacing delay in the units indicated by the previous propertyDelay
Scheduling algorithm
The scheduling algorithm is executed whenever a new job arrives, at regular intervals:
245
Enfocus Switch 10