Specifications

6. Select a new location for the application data root that offers full access rights to the intended
limited user(s).
7. Switch guides you through the procedure of relocating the application data root.
8. Quit Switch .
3.2 Running Switch for the first time
Preparing to run Switch
Depending on what you intend to use Switch for, you will need different pieces of information
to get Switch completely up and running. You may need to obtain some of this information from
your system administrator.
• If you have purchased Switch , you'll need your license key to license the application (see
Licensing on page 19).
• If you want Switch to send email messages, you'll need the name and related information
of your outgoing SMTP email server (see Mail send preferences on page 185).
• If you want Switch to receive files through email, you'll need the log-in information for your
POP3 email accounts (see Mail receive on page 263).
• If you want Switch to send or receive files through FTP, you'll need URL and log-in information
for the FTP servers (see FTP send on page 261 and FTP receive on page 258).
3.3 Licensing
From the About Enfocus Switch window, you can:
• start a 30-day trial (see Starting a trial on page 20),
• activate your license (see Activating licenses on page 21),
• deactivate your license,
• repair your license.
For easiest configuration, the machine running your copy of Switch should be online with full
Internet access while performing licensing tasks.
However, if the machine you are using does not have full Internet access, you can perform
licensing tasks off-line if you:
• have access to Internet e-mail and use of a Web browser on another machine,
• can copy a file received in an Internet e-mail message to the machine you are using (using
a USB flash memory drive, a diskette, an internal network...).
19
Enfocus Switch 10