Specifications

13. Advanced topics for Designing flows
13.1 Flow properties
DescriptionProperty
The name of the flow as it is shown in the Flows paneName
A description of or comments about the flow; the text in this field may have
multiple lines
Description
A PNG or JPG image to be shown in the background of the flow design; the
background image is placed at its effective resolution, and repeated (as tiles)
Background
image
to fill the canvas; when the flow is not editable (because it is locked or
active), the background image is darkened
The background image is a kind of wallpaper on which the flow design is
drawn; light colors or sober patterns work best
A PNG or JPG image to be shown in the upper-left corner of the flow design,
on top of the background image; the header image is not repeated and it
is not darkened when the flow is not editable
Header image
The header image is intended to mark a flow with a company or brand logo;
small images work best (avoiding overlap with the actual flow design)
If set to Yes, two additional performance properties for flow elements that
support concurrent processing are unlocked. Hence users can change the
Allow advanced
performance
tuning
default number of slots and the idle time-out for those elements. For more
information on the number of slots see the separate topic on Processing on
page 187.
13.2 Preferences
User interface preferences
These preferences configure some aspects of the Switch user interface.
DescriptionProperty
The language used for the user interface; the possible choices are
determined at run-time depending on the installed language packs (English
is always available)
Language
Changes take effect only after re-launching Switch
184
Enfocus Switch 10