Specifications

Note: By default, the activation request file is called requestdeactivate.xml.
6. A message will appear saying that Step 1 of the off-line deactivation has been completed
successfully. Click Finish / Done.
At this point, you will not be able to run this copy of Enfocus Switch anymore.
The License tab of the About Enfocus Switch window will show “Not Allowed to run
(Partial deactivated License)”.
You will still be able to open Switch designer and export the flows, but you will not be able
to process any jobs.
7. Copy the deactivation request file to a computer with Internet access using whatever method
you have available - USB thumb drive, diskette, network...
Uploading the deactivation request file and downloading the response file
Once you have copied the deactivation request file to a machine with full Internet access, do
the following:
1. Start a web browser on that machine and go to http://www.enfocus.com/Activation.
2. On the web page, select Offline Product Deactivation and click Continue.
3. Browse for the deactivation request file you copied to this machine and click Continue.
4. Verify that the product information contained in the deactivation request file is correct and
click Continue.
5. The website generates a response file (response.xml).
Depending on the level of security of your Web browser, the response file will download
automatically, or it may be blocked.
If it is blocked, click the direct link to download it.
Important: Do NOT click on the warning message at the top of your browser window
then go back to the previous page and try to download the file again. If you do this the
file you download will be corrupt.
6. Copy the response file back to the machine running Enfocus Switch and go to that machine.
Loading the deactivation response
Once you are back at the machine running Enfocus Switch, do the following to load the
deactivation response file:
1. Open the Deactivate License Wizard (on PC) or the Deactivate License Assistant (on Mac) by
either:
• going to the License tab of the About Enfocus Switch window and clicking Deactivate, or
• going to Help > License > Deactivate .
172
Enfocus Switch 10