Specifications

4. Leave Step 1: Create an activation request selected and click Next / Continue.
Note:
You should have created this activation account in Creating an activation account on page
20.
If you have not created an activation account yet, go to http://www.enfocus.com/CreateAccount
on a computer connected to the internet, and see Creating an activation account on page 20
for instructions.
5. Save the activation request file.
a) Click Save As (PC) or Select... (Mac).
b) In the pop-up that opens, browse to the desired location and click Save.
Note: By default, the activation request file is called requestactivate.xml.
6. A message appears saying that Step 1 of the off-line activation has been completed successfully.
Click Finish / Done.
7. Copy the activation request file to a computer with Internet access using whatever method
you have available - USB thumb drive, diskette, network...
Uploading the activation request and downloading the response file
Once you have copied the activation request file to a machine with full Internet access, do the
following:
1. Start a web browser on that machine and go to http://www.enfocus.com/Activation.
2. On the web page, select Offline Product Activation and click Continue.
3. Browse for the activation request file you copied to this machine and click Continue.
4. Enter your activation account password in the Password: field (your Account Name should
be filled in automatically) and click Continue.
5. Verify that the product information contained in the activation request file is correct and click
Continue.
6. The website generates a response file (response.xml).
Depending on the level of security of your Web browser, the response file will download
automatically, or it may be blocked.
If it is blocked, click the direct link to download it.
Important: Do NOT click on the warning message at the top of your browser window
then go back to the previous page and try to download the file again. If you do this the
file you download will be corrupt.
169
Enfocus Switch 10