Specifications

12. General application reference
12.1 Licensing
Starting a trial off-line
If the computer where you will use your software is NOT connected to the internet, you need to
start your trial off-line.
To start a trial off-line, do the following:
1. Create the trial request file using the Activate License Wizard / Assistant, and copy it to a
machine with Internet access.
See Creating a trial request on page 166.
2. Upload the trial request file, download the response file and copy this file to the machine
where Enfocus Switch is installed.
See Uploading the trial request and downloading the response file on page 167.
3. On this machine, use the Activate License Wizard / Assistant to start your trial.
See Loading the trial response file on page 167.
Creating a trial request
To create a trial request file, do the following:
1. Go to the Trial tab of the About Enfocus Switch window and click Start Trial.
This opens the Activate License Wizard (on PC) or the Activate License Assistant (on Mac).
2. Click Next (on PC) or Continue (on Mac) in the first screen of the Activate License
Wizard/Assistant dialog box.
3. Select Off-line activation and click Next / Continue.
4. Leave Step 1: Create an activation request selected and click Next / Continue.
5. Enter the name of your activation account and click Next / Continue.
Note:
You should have created this activation account in Creating an activation account on page
20.
If you have not created an activation account yet, go to http://www.enfocus.com/CreateAccount
on a computer connected to the internet, and see Creating an activation account on page 20
for instructions.
166
Enfocus Switch 10