Specifications

2. Select Resolve transparency checkbox to enable flattening. All objects using a blend mode or
transparency will be flattened.
3. Enable Resolve overprint if you want to flatten overprint objects as well, without changing the
visual appearance.
4. Set the Print resolution. If the flattening result cannot be generated as lineart objects, an image
will be generated at the selected resolution.
Note:
If flattening is needed on an RGB object, it will be put in CMYK (+ spot colors) by the flattening
mechanism. Objects created by the flattener will always be in CMYK + spots color space.
When the Resolve transparency checkbox is not selected, overprint problems will not be flattened,
unless the Resolve overprint checkbox is selected. This means that other transparencies (at least
those not interfering with overprint objects) remain in the PDF.
6.6 Action Lists and Preflight Profile
Action Lists and Preflight Profiles are the “fuel” for the preflighting process. For a more detailed
overview of Preflighting, see Preflighting and Checking PDF Documents on page 62.
Adding Action Lists and/or a Preflight Profile
To add one or more Action Lists to a hot folder:
1. In the Hot Folder Editor, go to the Action Lists and Preflight Profile category
2. Click the + button below the Selected Action Lists area to open the Select Action List dialog.
3. Select one or more Action Lists you want to add, either From database on page 49 or From file
on page 49. You can select multiple Action Lists in one go by holding the shift key or the ctrl
(Windows) or apple (Mac OS) key.
4. Click OK button. The Action Lists of your choice are added to the bottom of the list of Selected
Action Lists.
5. If necessary, change the order of the Action Lists: select an Action List and click the Move Up
( ) or Move Down ( ) button.
Note: The Action Lists will be run on the PDF documents in the order in which they appear in
this list: the Action List on top of the list will start first. As a different order can give a different
result, it is important to make sure this order is correct.
To add a Preflight Profile to a hot folder:
1. In the Hot Folder Editor, go to the Action Lists and Preflight Profile category.
2. Click the + button below the Selected Preflight Profile area to open the Select Preflight Profile
dialog.
48
Enfocus PitStop Server