System information

any change made to the document will be “recorded” per editing session and can be traced in the

edit log.

Figure 18: Starting a Certified PDF workflow for a PDF document

To start a Certified PDF workflow

1. Open the PDF document for which you want to start a Certified PDF workflow.

2. Choose Certified PDF > Start Edit Log , or click the Start Edit Log button in the Enfocus

Certified PDF Panel

Note: If you have made any changes to your PDF document, you should save it before you start

the Certified PDF workflow. If you did not save it, a warning will appear prompting you to do so.

The Certified PDF workflow has now been started for this PDF document.

3. Click OK.

6.7 Preflight and Verify

The Preflight and Verify button in the Certified PDF Panel will check all aspects of the Certified

PDF Workflow:

• The PDF document will be preflighted using the selected Preflight Profile.

• The defined Original Documents will be checked

• The selected Preflight Profile is checked in the Certified Preflight Profile Comparison

• The Certificates are checked for Certified PDF 2 compliancy

6.8 Certified PDF Preflight

In the Preflight category in the Certified PDF Panel, you can define the Preflight Profile to be used,

view the result of the preflight, preflight the document, etc.

Enfocus PitStop Pro