System information

10.7 Using the Output Intent Panel
In the Enfocus Output Intent Panel, you can select and apply an Output Intent. The Default Output
Intent Templates are installed with the application, and can not be changed. The Local Output
Intent Templates are only available to the current user.
To apply an Output Intent
1. Do one of the following:
• Choose Window > Show Enfocus Output Intent Panel.
or
• Choose Window > Show Enfocus Inspector, open the PrePress > Output Intent category,
and select Set PDF/X Output Intent from the fly-out menu
2. Select the Output Intent you want to use
3. Click Apply
To check what Output Intent is currently applied
1. Choose Window > Show Enfocus Inspector or click the Show Inspector button to display
the Enfocus Inspector.
2. Select the PrePress > Output Intent category
The Enfocus Inspector will show what Output Intent is applied, along with all its details
To create a new Output Intent Template
1. Choose Window > Show Enfocus Output Intent Panel.
2. Select the category in which you want to create a new Output Intent
3. Do one of the following:
• Choose Manage > New to create a new Output Intent from scratch
• Choose Manage > New From ... to create a new Output Intent based on an existing one
• Choose Manage > Import to import an Output Intent that was exported earlier
4. In the Output Intent Editor, define or change the settings for the Output Intent
5. Click OK
To edit an Output Intent Template
1. Choose Window > Show Enfocus Output Intent Panel.
2. Double-click the Output Intent you want to edit, or choose Manage > Edit
3. In the Enfocus Output Intent Editor, define the Output Condition Name, Profile, Identifier, Registry
and Description.
4. Define if the ICC Profile needs to be embedded.
202
Enfocus PitStop Pro