System information

This may lead to a loss of detail in some regions. Over most of the tonal range, a close match is
obtained. This method is suited for spot colors.
Figure 86: Absolute colorimetric remapping clips colors outside of the gamut to a color on the gamut boundary
(B). Colors which cannot be displayed in the target color gamut will be lost.
To change the rendering intent of an image
1. Using the Select Objects tool , select a pixel image.
2. Choose Window > Show Enfocus Inspector or click the Show Inspector button to display
the Enfocus Inspector.
3. Click the Fill and Stroke > Fill category.
4. Select a Color rendering intent.
5. If necessary, adjust the Smoothness.
10.5 Using spot colors
Premixed inks
Spot colors are colors which are printed with their own premixed inks. You can choose from several
spot color systems and from hundreds of different spot-color inks. In spot-color offset printing,
each spot color is reproduced using a single printing plate. In contrast, process color printing uses
four inks only (CMYK: cyan, magenta, yellow and black) to reproduce all colors.
197
Enfocus PitStop Pro