Specifications

48
PREPARING THE MOTORCYCLE FOR
REUSE
 Remove the anti rust solution from all plated
parts and clean the motorcycle well.
 Inflate the tyres to the correct tyre pressure.
 Ensure battery is fully charged and proper
electrolyte level is maintained.
 Connect the battery.
 Lubricate all control cables and pivots.
 Check proper level of oil in engine.
 Clean and remove the motor oil from tank
and fill tank with fresh petrol.
 Clean carburetor and air filter.
 Remove plastic covering from the silencer.
 Remove spark plug on cylinder head and pour
in a few drops of engine oil. Crank engine a
few times to lubricate cylinder walls a nd
piston. Clean spark plug and refit.
 Switch on ignition switch.
 Start vehicle and warm up engine for a few
minutes before riding the vehicle.
NOTE :
 Do not raise the engine rpm the moment it is
started, allow the engine to run at idling
speed.
S T O R A G E
P R E C A U T I O N S