Specifications

43
REASSEMBLY OF BATTERY ON VEHICLE
 Connec t the positive terminal (Both Red
wire).
 Connect the negative terminal (Green & Black
wire).
 Smear the terminals with petroleum jelly.
 Close the battery cover and tighten the bolt
 Position the battery cover over the battery
such that it engages with the lock peg on
top.
 Push the lock assembly inside the locator.
Turn the key clock wise to lock the battery
cover. Then release the key.
CAUTION :

Do not use battery with low electrolyte level
as the battery internals will get damaged.

Do not overfill the battery electrolyte as it will
spill ot through the over flow pipe and cause
corrosion to vehicle parts.
BATTERY &
MAINTENANCE
 Th e v e hic le is
pr o v id ed w i th
12V - 14 AH (for
E -S t art) an d
12V - 5 AH (for
Kick Start)
 P e r i o d i c a l l y
check the Battery for
- Cleanliness and corrosion free terminals.
- Electrolyte level in each cell.
 If electrolyte level is low, top up with distilled
water.
CAUTION :
Electrolyte shall be filled only between minimum
& maximum levels indicated in battery as “min”
& “max” respectively. Usage of battery with
electrolyte below the minimum level will damage
battery internals and electrolyte above the
maximum level will result in spillage of acid.
Use only distilled water meant for use in batteries
to avoid damage to battery.
D O I T Y O U R S E L F