Specifications

39
 Tighten the lock nut
 Chec k f or free
rotation o f rear
wheel.
REAR BRAKE PEDAL HEIGHT
 Loosen the lock nut
 Turn in or out the
pedal stop pin till
the brake pedal and
front foot rest are
in the same height
as shown in fig.
D O I T Y O U R S E L F
REAR WHEEL REASSEMBLY
 Ensure the four cush rubbers are in position
inside the rear wheel
hub.
 Tilt v ehicle to right
an d ins er t whe e l
assembly between the
swing arms.
 Po si ti on th e re a r
wh e el w it h c u s h
r u bb e r o n th e re a r
chain sprocket.
 Hold wheel collar and spacer in position.
 Insert the wheel spindle along with chain
adjuster from the LH side of vehicle and
gently tap it through the wheel.
 Ensure that the mark on the chain adjuster
notch butts with the stopper.
 Tighten the castle nut firmly and ensure that
the hole on axle shaft and the slot on castle
nut are aligned to enable split pin fitment.
 Fit the split pin.
CAUTION :
 Do not force the spindle into the wheel as
the threads may get damaged. Tap it through
the wheel gently.