Specifications

35
Cleaning and adjusting Plug gap
SPARK PLUG
 Two spark plugs are
provided in your
vehicle
 Remove spark plug
using the plug
spanner and tommy
bar.
 Clean the insulator
tip and electrodes of
the plug carefully
using a p ointed
scraper or spark plug
cleaner.
 Set the gap between
0.70 to 0.80 mm.
 Refit the spark plug
on the cylinder head.
INSPECTION OF TYRES AND WHEELS
 Inspect the tyres periodically for
tread wear, cracks and cuts.
Minimum tread depth :
Front tyre : 1mm
Rear tyre : 2 mm
D O I T Y O U R S E L F
 Check and remove stone, splinters,
nails or other particles embedded
in the tyre treads.
 Bald sp ots / sw elli ng m ay be ca use d by
in ter n al da ma ge . Re p la c e th e tyr e s , i f
defective.
 Replace tyres when the tread depth has reached
the minimum as specified.
 Pe rio d ic al ly in s pe ct w h e e ls f o r s p o k e s
breakage and wheel rim run out.
 Check proper seating of the tyre beading on
the rim whenever the tyre is reassembled.
 Whenever a new tyre is installed, ensure rim
and spokes do not get damaged on account
of using wrong levers.
 Use only standard tyres & tubes inflated to
correct pressure.
 Repeat the above procedure for the secondary
sparkplug.
Gap 0.70 to 0.80 mm.