Specifications


Solution3.4InstallationandOperationManual
 43
Before turning‐on the fan,
allowthewoodfiretoreach
operating temperature
(approximately one hour).
The increased airflow from
thefancools thefireboxand
could affect the start‐up
combustion efficiency if the
fan is turned on too early.
You can also install a
thermodisc(A)toenablethe
fan to start or stop
automatically when the
woodfireis hot or toocold.
The standard thermodisc 
part number is ACO5530.
UsetheAC02056foraquick
connect model. Installation
instructions are supplied
withthethermodisc.

CAUTION: ENSURE THAT THE FAN’S POWER CORD IS NOT IN CONTACT WITH ANY SURFACE OF
THE WOOD FIRETO PREVENTELECTRICAL SHOCK ORFIRE DAMAGE. DONOT RUN THE POWER
CORDBENEATHTHEWOODFIRE.