Specifications


Solution3.4InstallationandOperationManual
 31
  
Clearancestoheat‐sensitivematerialsandfloorprotection

7.3 FLOORPROTECTOR
If the wood fire is to be installed  on top of a combustible floor, it must be guarded by a non
combustiblematerialasshownonthedottedlineareaoftheabovefigures.Installa850mm(W)x
1215mm(D)floorprotectionof6mmofthicknesswiththermalconductivity of0.8m
2
K/Wper4 
mmthick.
 FLOORPROTECTOR*
FROMDOOROPENING
D 615mm
E 200mm**

*Cement fibre sheet or similar. No  protection is required if the unit is installed on a  non‐
combustiblefloor(ex:concrete).
**Thefloorprotectorshallextendnotlessthan200mmfromeachsideofanyashremovalor
fuelloadingopeningsunlessthefloorprotectorformsanabutmentwith
awallorheatshieldat
alesserdistance.
